Currency:

GBP
0 items in the shopping cart
• No products in the cart.

# Resistor Colour Wheel

£0.00

## Description

I set up the studio flash to take pictures of the butterfly from the previous post. One of them made an interesting pzzzt sound and gave off a thin plume of smoke before I could pull the plug.

I took it apart to see what was going on and found the offending resistor in the space arrowed.

Urgh! Definitely the source of the pzzzt!

Resistors use coloured bands to show their value. There are usually four bands, the first two code for the first two digits of the resistors value, the third is the multiplier, basically the number of zeroes on the end of the number. The final band shows the tolerance of the resistor, how accurate it is.

I thought I’d make a code wheel to help find the value of resistors by dialing in their colour bands.

Download the file from the link and print out the parts onto thin card (230 gram / 230 micron) Cut out the holes the cut out the parts. Lift up the three tabs in the largest disk. Thread the other two disks into place as shown above.

Fold the tabs flat. Dab a small amount of glue on each tab and glue the cover into place. Make sure the disks are free to turn.

Flip the disk over and glue the guide on the back.

To use the Resistor Code Calculator, dial in the colours and read off the number – simple!

So for example a yellow, purple, orange resistor, would have a value of 47k ohms.

Paper engineering meets electronic engineering.

Other projects you might be interested in:

## 7 reviews for Resistor Colour Wheel

• Thank you Rob. My son has got

Thank you Rob. My son has got an electronic experimental kit as a Christmas gift. So the Colour Wheel is very useful for him (an much more plausible than the table which was included).

• I didn’t know Rob was good at

I didn't know Rob was good at electricity and resistor, as well. It is well done, and it moves. Helpful for electronic engineering students and for mechanical automata ones. Congratulations, also!

• Having now built the resistor

Having now built the resistor wheel, my brain is now churning on similar wheel constructions, like seekrit message decoder wheels. Star charts. Stuff like that. The mechanism worked well, and the double-thick back makes it feel like I'm not about to bust the wheel when spinning the pieces.

• Looks to me as if Rob is good

Looks to me as if Rob is good at EVERYTHING!

• This is such a marvelous and

This is such a marvelous and useful tool that I laminated each of the pieces with 5 mil laminating film so I can keep it in my electronics kit without damaging it.  It is a wonderful item and I can't believe I ever worked without it! ★★★★★

• And you are not the only

And you are not the only one!

http://http://www.robives.com/blog/electronics_weekly

• Nice idea, I printed it at

Nice idea, I printed it at once. Too bad it doesn't take resistors with 5 bands into account.

Good work anyway.

Regards,

Gerald

• Hello,
Thank you, it’s very

Hello,

Thank you, it's very good.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

## 7 reviews for Resistor Colour Wheel

• Thank you Rob. My son has got

Thank you Rob. My son has got an electronic experimental kit as a Christmas gift. So the Colour Wheel is very useful for him (an much more plausible than the table which was included).

• I didn’t know Rob was good at

I didn't know Rob was good at electricity and resistor, as well. It is well done, and it moves. Helpful for electronic engineering students and for mechanical automata ones. Congratulations, also!

• Having now built the resistor

Having now built the resistor wheel, my brain is now churning on similar wheel constructions, like seekrit message decoder wheels. Star charts. Stuff like that. The mechanism worked well, and the double-thick back makes it feel like I'm not about to bust the wheel when spinning the pieces.

• Looks to me as if Rob is good

Looks to me as if Rob is good at EVERYTHING!

• This is such a marvelous and

This is such a marvelous and useful tool that I laminated each of the pieces with 5 mil laminating film so I can keep it in my electronics kit without damaging it.  It is a wonderful item and I can't believe I ever worked without it! ★★★★★

• And you are not the only

And you are not the only one!

http://http://www.robives.com/blog/electronics_weekly

• Nice idea, I printed it at

Nice idea, I printed it at once. Too bad it doesn't take resistors with 5 bands into account.

Good work anyway.

Regards,

Gerald

• Hello,
Thank you, it’s very

Hello,

Thank you, it's very good.